TX-2188 (I) setting adhesive is a two-component (A/B) acrylate copolymer lotion adhesive, which is mainly suitable for forming cylindrical or spherical solids with powdered activated carbon. The A/B components undergo cross-linking reactions with unique functional groups, and after solidification, they exhibit excellent water resistance, acid resistance, and alkali resistance, thereby improving the service life of adsorbent particles in acid and alkali systems, saving costs, and improving efficiency.

1，Main technical indicators:

(1) Appearance: Component A - milky white viscous liquid;  Component B - dark brown viscous liquid.

(2) Solid content: Component A (S=29 ± 1%);  B component (S=99 ± 1%).

(3) PH value: Component A (5.0~7.0).

(4) Viscosity: Component A (35000-4500mpa.s)/250C;  Component B (200-400mpa.s)/250C.

2，Applicability: Widely used for powder activated carbon molding in cylindrical or spherical solids.

3，Characteristics:

(1) After the A/B component is cured in proportion (100: 10-20%), it has good fastness and pressure resistance, extending the reusable time of the adsorbent material particles.

(2) Has good water resistance, acid resistance, and alkali resistance, improving the service life of adsorption materials.

(3) The resin formed after the A/B components are cured in proportion is a non-toxic material.

4，Applicable methods and precautions:      

(1) Mix component A: B=100:10-20% evenly, and add a certain proportion of water according to actual needs and stir evenly.

(2) Mix powdered solids such as activated carbon in a certain proportion with the above (A/B) mixed adhesive and an appropriate amount of water in a mixer

Uniformly combine, then granulate (columnar or spherical), dry at 130 ° C/3 hours to form, and let it dry naturally for 24 hours.

(3) Before using the glue, mix component A evenly, add component B while stirring, and then add an appropriate amount of water until uniform. This mixed adhesive has a shelf life of 1-2 hours, which means it must be used up within the shelf life, otherwise it cannot be used after curing.

(4) After using components A and B, the remaining adhesive must be sealed properly (especially component B is prone to curing and is scrapped).

(5) Do not mix with other adhesives to avoid affecting the quality and effectiveness of the adhesive.

(6) This product should be stored in a dry and cool place, with a suitable storage and use temperature of 5-30 ° C, avoiding direct sunlight.

5，Packaging specifications: TX-2188 (I) A/50 Kg, TX-2188 (I) B/25Kg, 200Kg plastic drum. Transport ordinary goods.

Note: The technical information of this product is based on theory and years of experience of our company, but does not serve as a guarantee of responsibility. Customers should first request the product and choose to use it themselves. If there are any difficulties in production, you can contact our technical department, and our company will fully cooperate to meet the customer's requirements.