TX --2188 (III) diatomite setting adhesive is a two-component (A/C) acrylate copolymerization lotion adhesive, which is mainly applicable to diatomite and other adsorption materials powder solid forming spherical or columnar solid. There are unique functional groups between the A/C components that undergo crosslinking reactions, resulting in high hardness and good water resistance after curing. Using less glue, reducing pore blockage, and having excellent adsorption performance.

1,Main technical indicators:

(1) Appearance: Component A - milky white viscous liquid; C component - dark brown viscous liquid.

(2) Solid content: Component A (S=29 ± 1%); C component (S=99 ± 1%).

(3) PH value: Component A (5.0~7.0).

(4) Viscosity: Component A (15000-20000 mpa.s)/250C; C component (200-400mpa.s)/250C.

2,Applicability: Widely used for forming spherical or columnar solids in powder form of adsorption materials such as diatomaceous earth.

3,Characteristics: (1) The A/C component has good fastness, pressure resistance, and hardness after being cured in proportion (1:5-15%).

(2) It has good water resistance, less adhesive usage, reduces pore blockage, and excellent adsorption performance.

(3) The resin formed after the A/C component is cured in proportion is a non-toxic material.

4,Applicable methods and precautions:

(1) Mix the components (A: C=45~60kg: 4.6~6) Mix evenly (an appropriate proportion of water can be added according to actual needs/70-54kg and stir evenly).

(2) Mix diatomaceous earth and other powdered solids in a certain proportion (100kg) with the above (A/C) mixed adhesive in a mixer, then shape them (using different equipment to make columns or balls as needed), dry them at 1300C/2 hours to form, and let them dry naturally for 24 hours.

(3) Before using the glue, mix component A evenly and add component C while stirring until uniform. This mixed adhesive has a shelf life of 1-2 hours, which means it must be used up within the shelf life, otherwise it cannot be used after curing.

(4) After using the adhesive A/C component, the remaining adhesive must be sealed properly (especially when the C component is prone to solidification and is scrapped).

(5) Do not mix with other adhesives to avoid affecting the quality and effectiveness of the adhesive.