Model: TX-2189A
Address: No. 8, South Industrial Development Zone, Sanshui Science and Technology Park, Foshan City, Guangdong Province, China
Manufacturer: Foshan Sanshui Taixin Synthetic Materials Co., Ltd
Introduction: Activated carbon shaping agent, diatomaceous earth shaping agent, carbon carving shaping adhesive, activated carbon non-woven fabric adhesive, water purification filter material shaping adhesive
TX-2189A activated carbon non-woven adhesive
TX-2189A activated carbon non-woven fabric is a one component acrylate copolymer lotion adhesive, which is mainly suitable for the fixation and molding of air purification materials such as dry powder activated carbon and non-woven fabric. It has the advantages of good adhesion, good flexibility, less glue usage to reduce clogging and increase the adsorption capacity of activated carbon, saving costs and improving efficiency.
1、 Main technical indicators:
(1) Appearance: Milky white viscous liquid
(2) Solid content: 46 ± 1%
(3) PH value: 5-7
(4) Viscosity: 6000~12000mpa. s/250C
2、 Applicability: Widely used in air purification materials such as activated carbon molded non-woven fabrics for environmental engineering purposes (deodorization, decolorization, absorption of harmful gases, water purification, wastewater treatment, etc.).
3、 Applicable methods and precautions:
(1) Before use, first conduct an experiment to determine the adhesive ratio. The recommended ratio is: (glue: water: charcoal)=4~6:15~20:5.
(2) Mix the glue and water evenly first, then add it to activated carbon and stir evenly to form a charcoal slurry.
(3) Water can be added appropriately according to the production process and equipment to control the consistency of the carbon slurry.
(4) Determine the spraying process or soaking process based on the required amount of charcoal to be applied (1-3 times/soaking after each squeezing).
(5) After carbonization, dry at 110-130 ° C for 3-5 minutes, then let it air dry naturally for 24 hours to meet the usage requirements.
(6) Do not mix with other adhesives to avoid affecting the effectiveness of use.
(7) This product should be stored in a dry and cool place, with a suitable storage and use temperature of 5-30 ° C, and avoid direct sunlight.
4、 Packaging specifications: TX-2189A/50Kg plastic drum. Transport ordinary goods.
Note: The technical information of this product is based on theory and our company's years of experience, but it is not a guarantee of liability. Customers should request samples before use and choose to use them themselves. If you encounter any difficult problems in production, you can contact our technical department, and we will fully cooperate to meet customer requirements.